View U4305B_8850064.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

keysight U4305B protocol exerciser for pci express ? 3.0 data sheet a multi-personality test instrument for pcie: C pcie root complex and card emulation C l1 substate emulation C ltssm analysis C ptc pci-sig compliance test C nvme conformance C ras system verifcation C multi - root virtualization
02 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet ras system validation U4305B-ffp intel ? ras validation framework now utilizes the keysight U4305B pcie 3.0 exerciser card to enable fault and error injection for testing of ras features, allowing you to ensure the system performance, resiliency and reliability when faults occur. pcie exerciser U4305B-ex3 emulate pcie device or root complex with tools to test and verify operation of equalization, power management, error recover, or complete nvme emulation, or use the exerciser to replay traffc captured by the u4301b pcie analyzer. one card: multiple pcie test applications protocol test card (ptc) U4305B-021 test to the protocol standard of the pci-sig with our automated test package. provides independent testing of pcie add-in cards and bios systems with both pcie 2.0 and 3.0 tests built in. feature pcie exerciser U4305B-ex3 ptc C protocol test card U4305B-021 ltssm tests U4305B-lt3 ras system validation U4305B-ffp general settings C session type: to upstream (ep) C session type: to downstream (rc) C link settings C equalization settings C transceiver settings C lane settings" x1 link only C skip settings C pattern matcher C trigger out C algorithmic payload C power management (l0s, l1, l1 substate) api only pci-sig compliance tests (ptc) ltssm tester traffc setup C three functions api only C additional functions optional decoder (bar values) api only confg space api only data memory api only virtual channel api only sr-iov optional mr-iov optional ecrc optional optional error insertion api only protocol checker dut confg space explorer nvm express optional test bench C pcie only C nvme conformance optional api access (restricted as per license) api command logger ltssm U4305B-lt3 perform link negotiations testing and thoroughly test a duts ltssm functions. verify all the transitions and validate state timeouts. predefned ltssm tests assess the ltssm operation.
03 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet overview C supports gen1 (2.5 gt/s), gen2 (5.0 gt/s), and gen3 (8.0 gt/s) speeds C x1, x2, x4, x8, or x16 link widths C standard height, half-length card C perform thorough pcie ? link testing C power management testing of l0s, l1, and l1 substates. the keysight U4305B exerciser can be confgured to provide sub-protocol layer test and debug for legacy and next generation pcie devices. the U4305B exerciser for pcie is an advanced traffc generator that can be used to send and respond to tlp, dllp, and physical layer packets to stimulate pcie devices and systems. the exerciser operates in one of three modes, pcie, mr-iov, or sr-iov. the capabilities of these modes can be enhanced with the purchase of additional software licenses. specifc dut test case requirements can be written by means of the included api. U4305B is a standard height, half-length pc form factor card as described in the pci express specifcation, and fts into every system including blade servers. the pci express test and debug capabilities of the U4305B is broken down into the sub-protocol layers of the specifcation as shown in figure 3. by emulating a pcie component (with or without mriov capabilities), the keysight U4305B exerciser acts as an ideal link partner by sending appropriate i/o traffc to stimulate the device under test. the device under test can be exercised under various conditions and scenarios without infuencing the performance parameters of the device under test. the keysight U4305B exerciser can send a block of tlp requests of 32- or 64-bit memory, i/o, confguration, or message types as stimulus to the device under test. it can also be used to send completion packets in response to duts requests. figure 1. the U4305B can emulate host or add-in card and tests all gen3 link speeds and widths. simple controls for traffc generation and error detection or insertion are simple to access and confgure.
04 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet the U4305B pcie 3.0 exerciser provides the following: C standard features C emulate root complex or add-in-card C equalization and transceiver control C confguration space register emulation C emulates three device functions C traffc generation C data replay of data captured on u4301a/b pcie analyzer C error simulation (crc errors, bit errors, poison tlp, etc.) C protocol exerciser gui provides a graphical control of the U4305B exerciser card C api program control can be done through tcl, python, c++, or c# C optional features C support up to fve functions C ecrc support C provides emulation of mr-iov capable component C provides emulation of sr-iov capable components C nvme emulation of root complex (includes conformance tests) C nvme emulation of end point the built-in test bench allows user generation on automated testing of pcie or nvme operations. the test bench comes with scripts that validate the operation from aspm or pci-pm l1 substates. these pre-written tests exercise each state 1000 times and provide pass/fail results that report on the control register operation as well as operation of each l1 substate entry/recovery. additional testing can be created that utilizes any dcom-capable language such as tcl, python, c++, or c# to execute test and generate reports. the exerciser even has api logging that allows the user to create an automated test structure by using the interface. the built in test bench allows user generation on automated testing of pcie or nvme operations. users can utilize any dcom-capable language such as tcl, python, c++, or c# to execute test and generate reports. data captured by the u4301b pcie analyzer can be replayed by the exerciser to emulate your device. simple export, edit and replay tools make the process easy. U4305B-ex3 pcie gen3 exerciser data link layer test features C receive a packet as having an lcrc error and nak in the packet to stimulate dut response mechanism. can repeat this for n (n is program - mable) for a programmable sequence number causing dut to replay multiple times and link retraining C can offset sequence number of transmitted packet for sequence number testing of the dut C can send tlps with lcrc and/or disparity errors C programmable replay timer value transaction layer test features C can generate 32 bit or 64 bit memory transactions, confguration cycles, i/o cycles, and message requests C generate correct or incorrect ecrc and check the same at the receiver C generate malformed tlp by making feld inconsistent with actual payload length C generate poisoned tlp and nullifed tlp C delay or discard erroneous comple - tion notifcation to force completion notifcation C supports data compare to check integrity of the payload exerciser protocol checker the U4305B pcie gen3 exerciser provides an internal protocol check that reports various protocol errors that the dut may have made and has been detected at the exercisers receiver. an external trigger can be generated on these events to enable trace tools to capture the details of the error condition. figure 2. u4301b pcie analyzer capture trace U4305B pcie exerciser traffic generation import packets from u4301b pcie analyzer for data replay on U4305B pcie exerciser
05 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet U4305B-ex3 pcie gen3 exerciser (continued) as an endpoint when emulating an endpoint, the keysight U4305B gen3 exerciser card is plugged into a pcie slot on the motherboard, as a normal pcie device. in this scenario, the exerciser card can be used to perform load and stress testing of the system under test. as a root complex when emulating a root complex, the keysight U4305B gen3 exerciser card communicates with the device under test through the keysight n5316a backplane board. in this confguration, the exerciser communicates to the dut through the bottom connectors. the dut receives its power from the backplane. figure 6 shows example setups of a protocol exerciser card emulating an endpoint and a root complex. figure 4. U4305B pcie exerciser as endpoint and root complex applications. figure 3. application coverage of the keysight U4305B pcie 3.0 exerciser module. u4301b protocol analyzer ltssm U4305B exerciser oscilloscope coverage data link layer physical layer transaction layer protocol layer exerciser as an endpoint hosting protocol exerciser software usb motherboard system under test exerciser as a root complex hosting protocol exerciser software usb keysight n5316a pcie backplane dut protocol exerciser card protocol exerciser card
06 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet power is a critical component of every pcie system today, and you need it to allow the verifcation of the ltssm power saving states. the U4305B enables you to emulate the power management states of ltssm. with support for both aspm (active state power management) and pci-pm (pci bus power management), the U4305B supports testing to allow you to verify entry and exit to these link states. figure 5. l0s enter and recovery is the frst step to reducing power consumption when recovery time is critical. additional power saving are available by using the l1 and l1 substates, but verifcation of recovery is key. other testing (nvme emulation, data replay, traffc and error generation) can be implemented while the power management settings continue to operate on the link as specifed. use scripting to link together multiple operations to recreate your desired test scenario. figure 6. the scripting test bench includes example verifcation scripts of l1 substate tests. power management
07 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet using the U4305B as an nvme device allows the user to verify the proper operation of the storage devices. the user gains easy access and control of all of the device confguration space registers and all nvme controller operations for fast and easy scenario testing. C exerciser allows the rc device to confgure its controller registers as an nvme endpoint and to start nvme traffc on the exerciser. C the supports msi and msi-x interrupt mechanisms so the rc device can use these mechanisms. the exerciser can respond to interrupts sent via msi or msi-x and fetch commands from the submission queues, execute them and write back completions in the completion queues. C the exerciser allows you to set up the values in the controller registers and also set values for data structures such as identify structures and log pages. it will also let you set the values for device features to be used with the get/set features command. C the exerciser shows up as two drives in the sut. figure 7. U4305B exerciser can perform all of the functions of an nvme endpoint with easily modifable operational parameters. U4305B-2fp nvme rc and endpoint emulation
08 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet U4305B-lt3 ltssm testing as an ltssm tester the link training and status state machine (ltssm) is the sub-block that drives and controls the link initialization and training process for a pcie device to enable the normal data exchange between pcie nodes on the link. ltssm operates at the physical layer and exchanges physical layer packets (ordered sets such as ts1 and ts2) to initialize, train, and manage the link. ltssm features are provided when option lt3 is purchased. the keysight U4305B exerciser provides positive and negative test cases to exercise critical functions of either the end node (adaptor card) or root complex (motherboard or blade). these test cases can force either dut target devices into various ltssm states, verify the state transitions, and timeout implementations, and report the test case results as either passed or failed. ltssm physical layer test features C supports six way speed change from any of the three speeds to any of the three speeds C when programmed as an upstream component (usc), supports going to gen3 speed with all phases of equalization (0 through 3), only phase 1, or without equalization C when programmed as a downstream component (dsc), it follows usc in equaliza - tion process C supports automatic or manual enabling/disabling of the lane reversal feature C supports independent lane polarity inversion setting for all the lanes C supports physical link widths x1, x2, x4, x8, and x16. link width is fxed and is specifed when ordering C supports option to enable/disable scramble modes for gen1 and gen2 speeds C supports all possible skip ordered sets (os) at transmitter for all three speeds C can replace stp/end of a transmitted packet by programmable character at gen1 and gen2 speeds. can corrupt fcrc of stp token at gen3 speed C supports programmable transceiver settings covering a wide range of transmitted signal amplitude and emphasis levels C supports programmable equalization settings sent in transition ordered sets (ts os) to request the dut to transmit at various signal amplitude and emphasis levels
09 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet nvme conformance testing included with U4305B-1fp and U4305B-2fp options figure 8. the nvme conformance test suite 1.1 testing is implemented in an easy-to-use validation framework. standardized testing not only improves the adherence to the specifcation and increases device interoperability, but it also decreases test time by providing tests that give developers insight into device operation. keysight is proud to implement the nvme conformance tests as defned by the university of new hampshire (unh) interoperability lab (iol). these tests provide pass/fail/warning results with detailed diagnostic information to improve nvme validation. the conformance test implements 38 tests for validating nvme and admin commands, features, and process operations. included in the nvme test package is a complete programming interface to allow the user to extend the automated test procedures. all of the nvme conformance tests are implemented using the tcl scripting environment, and scripts are open to user modifcation. the scripting environment includes a tcl language editor with autocomplete features.
10 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet the U4305B pcie exerciser supports a rich programming interface that allows automation of all of the exerciser capabilities. programming can be done via tcl, which is part of the controller pc software package. experienced users may directly use the api through its com interface within other programming languages as well. (examples are included for tcl, python, c++, and c#.) api programs can control the exerciser to do complete pcie test automation. the program can also share the control with the gui, allowing the user to automate some tasks and still use the exerciser gui for manual control. in order to simplify programing, the U4305B includes an api program logging console. to use this tool, the user simply launches the api console, chooses and preferred programming language, and then uses the exerciser gui interface to perform a test. then save the program and add any loops, test conditions, or other program operations of interest. note that the following api calls are not logged: calls initiated through ptc, ltssm, or nvme conformance test suite. you can view the api logs in the following formats: C tcl C c# C c++ C python C plain text figure 9. the test bench is an easy-to-use automation environment that can generate reports and comes with example tcl automation scripts. U4305B-ex3 pcie gen3 exerciser test automation
11 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet U4305B-024 five function emulation U4305B-025 mriov emulation U4305B-026 sriov emulation primary option ras-ffp exerciser license Cex3 exerciser + five function (ex3 + 024) ras-ffp sriov (026) mriov (025) sriov (026) mriov (025) iov options ras-ffp -026 -025 -026 -025 functions 3 3 3 3 5 5 5 virtual functions 4 4 8 8 hardware channels 3 3 7 7 5 13 13 virtual channels 2 2 2 1 2 2 1 completion queues 2 2 2 3 2 2 5 virtual link 1 1 virtual hierarchies 3 5 the keysight U4305B can be optioned to support multiple functions, virtual functions, and virtual hierarchies. exerciser as a non-iov pcie device the exerciser behaves as non-iov end point (ep) or root complex (rc) when the protocol is set to pcie. in this mode the U4305B exerciser has three hardware channels and each channel is associated with a specifc function (f0, f1, and f2). the traffc in each channel can be programmed independently either through the gui or through the pci port. two additional functions can be obtained with the purchase of the option 024 software license. exerciser as a sr-iov capable device the exerciser behaves as a sr-iov capable end point (ep) or root complex (rc) when the protocol is set to sr-iov. in this mode it is compliant with sr-iov specifcation rev. 1.1 (september 8, 2009). in this confguration the exerciser supports the following: C one non-iov function C two physical functions (pf) C two virtual channels (vco and vc(x)) C two virtual functions (vf1 and vf2) per pf multi-root testing if you want to test an mriov-capable pcie switch, then the protocol exerciser needs to emulate a pcie device with mriov capabilities. the mriov license enables the exerciser to emulate an mr- (multi-root) enabled pcie device. as an mriov-capable device, the exerciser supports up to fve virtual hierarchies at a time. the keysight pcie protocol exerciser can perform the link negotiation, initialization and training, data link layer functions, and handle incoming requests and completions as per the: C pci express 3.0 base specifcation for testing a non-iov pcie component C mriov specifcations revision 1.0 for testing an mriov capable pcie component C sriov specifcations revision 1.1 for testing an sriov capable pcie component
12 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet U4305B-ffp pcie ras test software license description intel ras (reliability, availability and serviceability) validation framework now utilizes the keysight U4305B pcie 3.0 exerciser card to enable fault and error injection for testing of ras features, allowing you to ensure the system performance, resiliency, and reliability when faults occur. figure 10. using the ras test scripts from intel, testing fault operations provides validation of the ras error framework. solution structure C intel pci express ras validation tool kit C keysight U4305B pcie 3.0 exerciser card C keysight pcie ras test software license 3.0 (or keysight pcie 3.0 exerciser software license) C intel pci express hardware error injection gui software (available from intel cdi) C pci express injection tool overview, order guide, user guide (available from intel cdi) intel pcie ras gui functionality ? open session ? read link state ? close session ? insert correctable errors ? insert un-correctable (non-fatal) errors ? insert un-correctable (fatal) errors error categories covered hw pcie up-stream error injections in-bound to cpu x1 pcie i/o pcie root complex processor pcie slot system under test gen 3- keysight U4305B x1 U4305B-ffp ras software license correctable errors uncorrectable errors pcie error types - dll error - surprise link down - flow control protocol - rx buffer overflow - malformed tlp - poison tlp - unsupported request - completer abort - unexpected completion - completion time out - acs violation correctable non-fatal fatal - rx error - bad tlp - bad dllp - replay timer time-out intel pcie * ras err inj gui 2.2
13 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet U4305B-021 protocol test card 3.0 figure 11. pcie link and transaction tests as defned by the pci-sig provide easy-to-understand pass/fail results. description option 021 protocol test card is a keysight technologies, inc. third-generation pcie 3.0 link and transaction compliance test tool. designed to the requirements of the pci-sig ? , the industry organization chartered to develop and manage the pci express standard, the ptc3 will provide the independent hardware vendor (ihv) and independent bios vendor (ibv) with link transaction test results designed to maximize interoperability and conform to current pcie 3.0 industry protocol specifcation. the pci express 3.0 link and transaction layer tests require the use of one protocol test card (ptc). the pci-sig has approved the use of the keysight U4305B protocol test card for pcie 3.0 compliance testing. it is considered a pass if a product passes all tests on this system at a compliance workshop. please see the pcisig.com website for more details on these test procedures. the pci-sig has developed test procedures for pci express link protocol testing and pci express transaction protocol testing to test add-in card compliance to the specifcation requirements. it also supports the pci express platform bios test to exercise the platform bios to make sure it properly detects and initializes pci express devices. key features and specifcations C pcie 3.0 link and transaction compliance testing C pci-sig-approved testing for pcie gen3 C includes pcie 2.0 and pcie 3.0 protocol test cases C supports pcie 2.5 gb/s, 5 gb/s and 8 gb/s speeds C requires only x1 lane width U4305B hardware C ptc3 software can be used on x4, x8, and x16 lane width U4305B C requires n5316a test C backplane to test add-in cards
14 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet U4305B-1fp nvme rc emulation figure 12. create up to 64 submission and 64 completion queues, and easily execute queue management commands. description as an nvme root complex, the exerciser submits various requests (nvme commands) to an nvme dut for completion. these commands include admin commands submitted to the admin queue as well as the i/o commands submitted to the i/o submission queue(s). by sending nvme command requests to the dut, you can check how the nvme controller responds to and completes these requests. you can also verify how the nvme controller handles admin requests such as queue management or controller initialization. create multiple submission and completion queues and then use the easy-to-use drag and drop interface to create and send nvme commands. C view and confgure nvme controller registers of dut C confgure the admin submission and completion queue attributes C initialize and confgure the interrupt mechanism C initialize, view, and edit the msi- x table of the dut C create up to 64 i/o submission and 64 completion queues C add nvme commands to submission queues and increase the doorbell accordingly. the commands are available as predefned templates C view the commands and their subsequent completions in the completion queues C create prp lists and prp entries that can be used in the submitted nvme commands for data transfer C create sgl entries and sgl lists for validating support of scatter gather operations
15 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet pc requirements figure 13. a microsoft windows pc is used to control the operation of the pci express exerciser. you can use the protocol exerciser gui to control, manage, and use the protocol exerciser card. multiple clients can remotely connect to a single U4305B exerciser session on the controller pc. figure 3 shows an exerciser session scenario in which session a and session b have been created on the controller pc with two U4305B exerciser cards. two clients are accessing session a and one client is accessing session b. controller and client pc requirements C usb 2.0 interface for each exerciser card C pentium processor 1 ghz or equivalent C windows xp (with service pack 3) or windows 7 (enterprise or professional 32-bit or 64-bit) operating system C at least 256 mb ram. for better performance, keysight recommends the installa - tion of at least 512 mb ram C at least 500 mb free disk space on the c drive sut usb usb clients controlling pc hosting the protocol exerciser software session a session b protocol exerciser card 1 protocol exerciser card 2
16 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet specifcations and characteristics physical characteristics size standard height half-length pcie module 106.7 mm (4.2 inches) high and 167.65 mm (6.6 inches) long weight 408 gr (0.9 lb) shipping weight: 2.36 kg (5.2 lb) connectors power input, usb 2.0b, and two sma(f) connectors for trigger in and out. edge connector width is determined by the product confguration purchased. note: the edge connector is not upgradable after purchase and keysight does not recommend or support the use of lane adaptors as they have a negative impact on the units performance at high speeds. power requirements input 15 vdc, 10 a maximum power dissipation 70 w maximum keysight part number 0950-5159 external power supply supplied with the exerciser input 100 to 240 v at 3.5 a maximum, 50 to 60 hz ltssm supported states the keysight U4305B supports seven of the 11 ltssm states. the supported states are: C detect C quiet C confguration C l0 C recovery C l0s C l1 U4305B trigger specifcations trigger output source impedance 50 ohms amplitude 2.4 v open circuited, 1.2 v into 50 ohms pulse width 120 ns trigger input maximum input 2.0 v input impedance approximately 4 k ohms environmental specifcations this instrument is intended for indoor use in an installation category ii, pollution degree 2 environment. temperature operating: 0 to +45 c storage: C40 to +70 c humidity 15% to 95% operating, non-condensing altitude 2000 m (6,500 feet) maximum safety iec 61010-1:2001 / en 61010-1:2001 canada: csa c22.2 no. 61010-1:2004 usa: ul 61010-1: 2004
17 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet n5316a pcie gen2/gen3 test backplane figure 14. general provides power and clock to dut test fxture for add-in card testing with exerciser power separate power on/off for fast reset in tests power reset aux (stand by) power for add-in card available if required per bus power switch link width all link widths are supported clocks clock generation with/without ssc input for external clock clock output (e.g. for oscilloscope measurements) supports different mid-bus probes n4241a/2a/3a reset/power button connectors bus 1 C one pair of x16 pcie connectors C two x8 mid-bus probe retention modules with bidirectional footprint supporting n4242a (x16), n4241a (x1, x4, x8), n4243a (dual x4) bus 2 C one x16 pcie connector with loop back bus 3 C one pair of x16 pcie connectors C two x8 mid-bus probe retention modules with unidirectional footprint supporting two n4241a (x1, x4, x8, x16)
18 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet use the following steps to confgure your U4305B pci express module for 8 gbps to ensure you have a complete system. confguration 1. select exerciser with required link width 2. select desired functionality 3. then select additional software license(s) U4305B hardware link-width C U4305B-e01 C U4305B-e04 C U4305B-e08 C U4305B-e16 ordering information optional C U4305B-022 ecrc optional C U4305B-1fp - nvme C U4305B-2fp - nvme with ep C U4305B-022 - ecrc C U4305B-024 - five function C U4305B-025 - mriov C U4305B-026 - sriov pcie ltssm tester C U4305B-lt3 ltssm pcie protocol test card C U4305B-021 pcie ras system validation C U4305B-ffp pcie exerciser C U4305B-ex3 step 1 step 2 step 3
19 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet 3. select available software options and accessories. depending on the selected functionality, you can add software options to expand the products capabilities. additional options for the pcie ras test software (-ffp) functionality U4305B-022 transaction layer end-to-end cyclic redundancy check (ecrc) software license additional options for the pcie exerciser (-ex3) functionality U4305B-1fp nvme host (root complex) exerciser and nvme conformance testing U4305B-2fp nvme host exerciser, nvme conformance testing, and nvme deivce emulation (includes option 1fp) U4305B-022 transaction layer end-to-end cyclic redundancy check (ecrc) software license U4305B-024 software license to enable fve functions for use with mriov, sriov and pcie U4305B-025 multi-root i/o virtualization software license U4305B-026 single-root i/o virtualization software license U4305Bu upgrade options U4305Bu-lt3 ltssm software license u4 305bu-1fp nvme host (root complex) exerciser and nvme conformance testing U4305Bu-2ep upgrade option 1fp to 2fp (add nvme device emulation) U4305Bu-2fp nvme host exerciser, nvme conformance testing, and nvme deivce emulation (includes option 1fp) U4305Bu-ffp pcie ras test software, fxed perpetual license U4305Bu-fx3 upgrade ras test to exerciser for pcie 8 gbps, fxed perpetual license U4305Bu-ex3 exerciser software license for pcie 8 gbps U4305Bu-021 protocol test card 3.0 software license U4305Bu-022 transaction layer end-to-end cyclic redundancy check (ecrc) software license U4305Bu-024 software license to enable fve functions for use with mriov, sriov and pcie U4305Bu-025 multi-root i/o virtualization software license U4305Bu-026 single-root i/o virtualization software license 1. select desired link width option (x1, x4, x8, or x16). link width is a fxed hardware confguration that is not upgradable after purchase. ensure your link width selection supports your future measurement needs. keysight does not recommend or support the use of lane width adaptors, as they greatly reduce the ability to reliably test systems operating at gen2 or greater speeds. link width (required, select one) U4305B-e01 exerciser board x1 for pcie 8 gbps U4305B-e04 exerciser board x4 for pcie 8 gbps U4305B-e08 exerciser board x8 for pcie 8 gbps U4305B-e16 exerciser board x16 for pcie 8 gbps 2. select desired functionality. at least one of the following functions must be ordered to make the U4305B operational. the U4305B can be confgured to support any combination or all of following functions. functionality (required, select at least one) U4305B-ex3 exerciser software license for pcie 8 gbps U4305B-021 protocol test card (ptc) U4305B-lt3 ltssm tester U4305B-ffp pcie ras test software, fxed perpetual license ordering information (continued) ordering accessories n5316a test backplane for pcie3/pcie2
mykeysight www.keysight.com/find/mykeysight a personalized view into the information most relevant to you. www.axiestandard.org advancedtca ? extensions for instrumentation and test (axie) is an open standard that extends the advancedtca for general purpose and semiconductor test. keysight is a founding member of the axie consortium. atca ? , advancedtca ? , and the atca logo are registered us trademarks of the pci industrial computer manufacturers group. www.lxistandard.org lan extensions for instruments puts the power of ethernet and the web inside your test systems. keysight is a founding member of the lxi consortium. www.pxisa.org pci extensions for instrumentation (pxi) modular instrumentation delivers a rugged, pc-based high-performance measurement and automation system. three-year warranty www.keysight.com/find/threeyearwarranty keysights commitment to superior product quality and lower total cost of ownership. the only test and measurement company with three-year warranty standard on all instruments, worldwide. keysight assurance plans www.keysight.com/find/assuranceplans up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/go/quality keysight technologies, inc. dekra certified iso 9001:2008 quality management system keysight infoline www.keysight.com/find/service keysights insight to best in class information management. free access to your keysight equipment company reports and e-library. keysight channel partners www.keysight.com/find/channelpartners get the best of both worlds: keysights measurement expertise and product breadth, combined with channel partner convenience. pcie and pci express are registered trademarks and/or service marks of pci-sig. for more information on keysight technologies products, applications or services, please contact your local keysight office. the complete list is available at: www.keysight.com/find/contactus americas canada (877) 894 4414 brazil 55 11 3351 7010 mexico 001 800 254 2440 united states (800) 829 4444 asia pacifc australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 11 2626 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 other ap countries (65) 6375 8100 europe & middle east austria 0800 001122 belgium 0800 58580 finland 0800 523252 france 0805 980333 germany 0800 6270999 ireland 1800 832700 israel 1 809 343051 italy 800 599100 luxembourg +32 800 58580 netherlands 0800 0233200 russia 8800 5009286 spain 800 000154 sweden 0200 882255 switzerland 0800 805353 opt. 1 (de) opt. 2 (fr) opt. 3 (it) united kingdom 0800 0260637 for other unlisted countries: www.keysight.com/find/contactus (bp-04-23-15) 20 | keysight | U4305B protocol exerciser for pci express ? 3.0 - data sheet this information is subject to change without notice. ? keysight technologies, 2010 - 2015 published in usa, may 12, 2015 5992-0553en www.keysight.com

▲Up To Search▲

Price & Availability of U4305B

	To Download U4305B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .